|
NOMINAL GRINDING CAPACITY ..................... 12" x 24"
MAXIMUM HEIGHT UNDER 8" WHEEL ..................... 15.6"
TABLE SPEED, INFINITELY VARIABLE .......... UP TO 82' FPM
MAX. LONGITUDINAL TABLE MOVEMENT, MANUAL ............ 30"
AUTO CROSS FEED INCREMENT ................ 0.002" TO .80"
AUTO CONINOUS CROSSFEED ................... 4' TO 40' FPM
CROSSFEED, MANUAL, HAND FEED PER REV. ............. 0.25"
GRAD. OF HANDWHEEL ............ 0.001"
MAX. CROSSFEED, MANUAL .............................. 14"
AUTO INCREMENTAL DOWNFEED INCREMENTS .. 0.00005" TO .0015"
POWER RAPID WHEEL POSITIONING RATE .............. 16" IPM
SPINDLE MOTOR .................................... 2 H.P.
WHEEL SIZE ............................. 8" X 1" X 1- 1/4"
WHEEL SPEED ................................... 3,600 RPM
APPROX. MACHINE WEIGHT ........................ 4,000 LBS.
EQUIPPED WITH:
"DX" PROGRAMMABLE ELECTRONIC AUTO INCREMENTAL DOWNFEED:
-SERVO DRIVEN DOWNFEED
-AUTO INCREMENTAL DOWNFEED FOR BOTH SURFACE & PLUNGE
OPERATIONS
-DUAL RATE AUTO DOWNFEED W/COARSE & FINE SELECTIONS
-DIGITAL DISPLAY FOR VERTICAL AXIS
-SPARKOUT PASSES (0 TO 5) W/AUTO TABLE PARK AT
COMPLETION OF GRIND CYCLE
-ELECTRONIC HANDWHEEL FOR MANUAL VERTICAL MOVEMENT
W/EACH GRAD. EQUIVALENT TO .00001", .0001" OR .001"
-POWER RAPID WHEEL POSITIONING
HYDRAULIC TABLE TRAVERSE
AUTOMATIC CROSSFEED
8" X 20" ELECTRO-MAGNETIC CHUCK
VARIABLE HOLD NEUTROFIER CONTROL & DEMAGNETIZER
COOLANT SYSTEM W/PAPER FILTRATION
OVER-THE-WHEEL DRESSER WITH MICROMETER ADJUSTMENT
2 H.P. SPINDLE MOTOR
MOTORS ARE 3/60/230-460 VOLT